Raidon ST7610-4S-S2 Manual de usuario

SOHORAID SeriesVersion : 1.0SR5650-4S-U3D SR7650-4S-U3DUser Manual

Chapter 1 RAID Introduction1.1. What is RAID?It is inevitable that a single hard disk, either with SCSI or IDE interface, will suffer the compatibil

Chapter 2 Installation2.1 Notice Before Installation2.1.1. STARDOM SCSI Series Products FeaturesSTARDOM SCSI Series Products with the features as fo

Step 4 Once the installation is completed, insert the tray back and fi x it fi rmly in the proper place.Step 5 Connect the cables to the corresponding

Step 4 Confi gure the IP address, subnet mask, gateway and DNS. You can consult with the MIS personnel in your company for the related IP address.St

Step 4 Confi gure the related settings.Baud Rate: 115200Data byte: 8 biteParity Check: NoStop bits: 1Flow control: NoStep 5 Select the terminal type.

2.4 System Control2.4.1 LCM (SR5650)Use the four function keys, (Up), (Down), ESC (Escape) and ENT (Enter) to control LCM (LCD Control Modul

Chapter 3 User Interface Introduction3.1 User Interface ArchitectureThe following is the GUI architecture:Quick InstallÆStep 1 / Step 2 / Step 3 / Co

3.3 Quick InstallYou can easily create a volume by using the “Quick install” function. On RAID levels 0, 1, 3, 5 and 6, the system will automatically

3.4 System Confi g“System confi g” function allows you to confi gure “System name,” “IP address,” “SCSI,” “Login confi g,” Password,” ”Date,” “Mail,” “SNM

3.4.4 Login Confi gSelect “Login confi g” to confi gure the time of single login and auto logout. Single login can prevent multiple users from simultaneo

IntroductionAbout this ManualThank you for using the product of RAIDON Technology Inc.This user manual will introduce the STARDOM SCSI series products

3.4.9 Event LogClick “Event log” to view the event messages. Click “Filter” to select the log type to be displayed. Click “Download” button to save th

• Physical Disk Field Description:SlotThe slot number of the hard disk. The blue button next to the number indicates “More Information” function. Cli

3.5.4 User Data Volume (UDV)Enter the “User data volume” function to view the status of each user data volumeFigure 3.5.4.1(Figure 3.5.4.1: Creating

3.5.6 Logical Unit Number (LUN)Enter “Logical unit” function to view the status of attached logical unit number of each UDV• LUN operations descript

Figure 3.5.7.4 (Figure 3.5.7.4: Creating UDVs named “UDV-R5-1” and “UDV-R5-2”, related to “VG-R5”. The size of “UDV-R5-1” is 50GB and the size of “UDV

Step 6 Detach LUN from UDV Enter “/ Volume confi g / Logical unit”Figure 3.5.7.7 1. Select LUNs by ticking the checkbox and then click “ ”.

Step 2 Create VG (Volume Group) Please refer to Step 1 of Example 1 to create a VGStep 3 Create UDV (User Data Volume) Please refer to Step 2 of E

(Figure 3.6.1.1: Enabling SAF-TE in Bus 1, SCSI ID2 and LUN 0)You can download SAF-TE end user software via the following websites:safte-monitor: http

out of tolerance. The advanced notice of possible hard disk failure allows users to back up hard disk or replace the hard disk. This is much better th

3.7.4 Log Import & ExportYou can click the “Congif import & export” function to import/export the confi gures3.7.5 ShutdownAfter you enter the

Step 4 Once the installation is completed, insert the tray back and fi x it fi rmly in the proper place. Step 5 Connect the cables to the corresponding

RAID 10(striping over the member RAID 1). Allows two hard disks to fail or being unplugged, but the hard disks must in different array.RAID 30(stripin

4.3 UDV ExpansionTo expand UDV size, please follow the steps below.1. Select “/ Volume confi g / User data volume”2. Select the UDV to be expanded an

AppendixA.Certifi cation list• RAMRAM Spec: 184pins, DDR333 (PC2700), Reg. (register) or UB (unbuffer), ECC or Non-ECC.Vendor ModelUnigen UG732D6688KN-

Info Admin Logout OK Info: Admin logout from <IP or serial console> via <Web UI or Console UI>.Error Thermal critical Error: System Overhe

Error PD read/write error Error: PD <#> lba <#> length <#> <read | write> error.Error UDV recoverable read/write error Error:

C. Using Notices1. In Microsoft Windows server 2003 or Windows XP, at least one LUN 0 must be confi gured for each SCSI ID. Otherwise the volume can

Step 3 Select “Internet Protocol (TCP/IP)” and click “Properties”. A window for IP address settings will pop up. Step 4 Confi gure the IP address,

Step 2 Select an ID for each device and avoid ID confl ict in the same SCSI bus. You can change the volume size in this page. The maximum volume siz

3. LoginSR7650-4S-U3D supports three types of connection for administration login: Web GUI, RS232 and SSH, respectively. Refer to section 2.3 in the u

Step 3 Select “Internet Protocol (TCP/IP)” and click “Properties”. A window for IP address settings will pop up. Step 4 Confi gure the IP addre

4. System SetupAfter the login to the system, you can use “Quick install” function for quick confi guration. On RAID levels 0, 1, 3, 5 and 6, the syste

ContentsChapter 1 RAID Introduction.................. 18 1.1. What is RAID?......